Lendus.

Duct Rodding Equipment Finance

Spread the cost of duct rodding and cable installation equipment from £1,500 to £22,000+ with flexible finance options: HP, lease or refinance. Compare rates from 40+ lenders.

Can you finance a duct rodding equipment?

Yes, duct rodding equipments are financed as a standard asset purchase, usually on hire purchase or a lease, with the machine itself acting as the security. UK prices typically run £1,500 to £22,000, and most deals are written over 12–36 months with a deposit of around 0–15%. Decisions typically take 24 hours. Used machines are financeable too, usually with a shorter term.

200+ UK lenders
2-minute application
No credit check to apply
FCA-regulated brokers

Typical Cost

£2k – £22k

Approval Speed

24 hours

Same-day for most orders

Rates From

7.4% APR

What would a duct rodding equipment cost per month?

£8,000
10%
60 months
9%
£0

Your estimate

Indicative only. Not a quote and not an offer of finance.

Pre-filled with a typical duct rodding equipment price. Indicative only, not a quote.

Compare duct rodding equipment finance rates from 200+ lenders

Check Eligibility

Finance options

Hire Purchase (HP)

Rate
From 8.0% APR
Term
12–36 months
Deposit
0–15%
Ownership
Yours at the end
Best for
A civils or telecoms contractor building a fleet of rodding equipment for repeat duct clearance and installation work

Finance Lease

Rate
From 7.4% APR
Term
12–36 months
Deposit
None required
Ownership
Return or buy (balloon payment)
Best for
Matching a rodding rig purchase to a specific duct build or maintenance framework

Operating Lease

Rate
From 8.6% APR
Term
12–24 months
Deposit
None required
Ownership
Return at end
Best for
Contractors that need rodding equipment for a defined contract without long-term ownership

Representative example

On a purchase price of £8,000: a 10% deposit of £800, then 48 monthly payments of £169 at 5.9% APR representative (fixed). Total amount payable £8,912, including the deposit. The rate you are offered depends on your business and the asset.

What buyers actually specify

Guide prices for sizing a finance agreement, not quotes. Manufacturers in this market mostly price on application, so where a current UK list price could not be confirmed the row describes a specification class rather than naming a model. Your supplier quote is what the agreement is written against.

Machine or specification Guide price Type
Manual Duct Rod Reel Set £1,500 – £4,000 Hand-Fed Rodding Reel
Powered Duct Rodding Machine £6,000 – £14,000 Motorised Rodding System
Combined Rodding & Winching Rig £12,000 – £22,000 Trailer-Mounted Rodding Rig

Ready to compare duct rodding equipment finance? 2 minutes, no credit check.

Check Eligibility

Tax benefits

Duct rodding reels and powered rodding machines qualify for the Annual Investment Allowance, so a cash or HP purchase can be deducted from taxable profit in the year of purchase. Lease payments are deductible in full as they're paid. Replacement rods, which wear and occasionally snap during use, are a running cost and are treated separately from the capital equipment on the finance agreement.

Market context

Duct rodding equipment is bought by telecoms, utility and civils contractors that need to clear, survey or install a way through underground ducting before cable can be blown or pulled through it. As with other duct-build equipment, purchases are typically tied to a specific framework or rollout contract with a network operator, water company or highways authority, and contractors commonly size and finance their rodding fleet to the duration of the current programme rather than for indefinite future use. Manual rod reels remain in use alongside powered rodding machines, and the choice between them is usually driven by duct length and ground conditions on a given job rather than by one replacing the other outright.

Bad credit?

Several of our 200+ lenders specialise in businesses with imperfect credit histories. You may need a larger deposit or personal guarantee, but options exist. Checking your options here does not affect your credit score, because we do not run a credit search to match you. A lender will run their own checks only if you decide to apply.

Compare rates from 200+ lenders, takes 2 minutes.

Check Eligibility

Frequently asked questions

What's the difference between manual and powered duct rodding equipment for finance purposes?
Manual rod reels are lower cost and suit shorter runs or occasional use, while powered rodding machines cost more but push rods through longer or more difficult duct runs faster and with less physical effort from the operator. Both are financed the same way, as capital equipment, but the higher price of a powered machine means the choice between hire purchase and leasing matters more, since it changes the monthly payment more noticeably than it would for a manual reel.
Can I finance rodding equipment alongside a cable blowing machine on the same agreement?
Yes, many contractors buy rodding and blowing equipment together as part of setting up for a duct installation contract, and most lenders are happy to finance the full kit on one agreement provided it's on a single supplier invoice. Financing them together can also simplify the paperwork if you're matching the whole equipment set to the same contract term.
How often does duct rodding equipment need replacing?
The core mechanism of a rodding machine has a long working life if maintained, but rods themselves wear and occasionally snap or kink during use and need periodic replacement, which is treated as a running cost rather than part of the capital purchase. The machine itself is typically replaced when it's damaged beyond economic repair or when a contractor needs a different capacity for a new type of job.
Can I finance used duct rodding equipment?
Yes, most lenders will finance well-maintained used rodding equipment from a dealer or another contractor. Given the relatively low cost of this equipment compared with other telecoms plant, some contractors find it simpler to buy outright, but financing is still worthwhile for spreading cost across a fleet purchase or preserving working capital when mobilising a new contract.
How quickly can duct rodding equipment finance be approved?
Most applications are approved within 24 hours, and given the relatively low cost of this equipment, purchases are very often approved the same day provided the business has a clean credit history and a clear supplier quote. Larger orders combining a powered rodding machine with a full trailer-mounted rig, or bundled with a cable blowing machine on the same contract, may take slightly longer while the lender reviews the complete specification.

Related equipment finance

More technology finance

See how lenders treat technology assets

Guides and resources

Ready to finance your duct rodding equipment?

Compare rates from 200+ lenders. No credit check.

Check Eligibility →
Check Eligibility, 2 min, no credit check